Training Program Objective:
This Training program provides an introduction to fundamental technologies of the mobile telecommunications Marketplace. Designed with the technical/non-technical professional in mind, this course provides Day-to-day examples of the intricacies and competitive landscape of the industry. This program also covers very brief description of GSM, GPRS,3G and CDMA technologies. Modules are covered in detail for every topic from signals to network architecture. Under this program we also focus on providing skills and knowledge necessary to install operate and troubleshoot a small branch office enterprise network including configuring a switch a router and connecting to WAN and implementing network security.
Training Program Outline:
- Basic of Mobile Communication
- 1G,2G (GSM and CDMA) in detail
- An introduction to GPRS network, Architecture of GPRS, Major difference between 2G and 2.5G,
- Introduction about 3G (CDMA, UMTS, WCDMA);
- Killing advantages of 3G over 2G, Architectural difference between 3G and 2G with protocol stacks, Brief Introduction of next Generation, A brief introduction of different operating systems of Mobile Communication.
Networking and Advanced Communication
Describe how a network works
- Describe the purpose and functions of various network devices
- Select the components required to meet a network specification
- Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
- Describe common networked applications including web applications
- Describe the purpose and basic operation of the protocols in the OSI and TCP models
- Describe the impact of applications (Voice Over IP and Video Over IP) on a network
- Interpret network diagrams
- Determine the path between two hosts across a network
- Describe the components required for network and Internet communications
Configure, verify and troubleshoot a switch with VLANs and interswitch communications
- Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and
- Explain the technology and media access control method for Ethernet networks
- Explain network segmentation and basic traffic management concepts
- Explain basic switching concepts and the operation of Cisco switches
- Perform and verify initial switch configuration tasks including remote access management
- Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp,
- ipconfig), SHOW & DEBUG commands Identify, prescribe, and resolve common switched network media Issues, configuration issues, auto negotiation, and switch.
- Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)
- Describe how VLANs create logically separate networks and the need for routing between them
- Configure, verify, and troubleshoot VLANs
- Configure, verify, and troubleshoot trunking on Cisco switches
- Configure, verify, and troubleshoot interVLAN routing
- Configure, verify, and troubleshoot VTP
- Configure, verify, and troubleshoot RSTP operation
- Interpret the output of various show and debug commands to verify the operational status of Cisco Switched network.
- Implement basic switch security (including: port security, trunk access, management vlan other than vlan1
Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network.
- Describe the operation and benefits of using private and public IP addressing
- Explain the operation and benefits of using DHCP and DNS
- Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM)
- Implement static and dynamic addressing services for hosts in a LAN environment
- Calculate and apply an addressing scheme including VLSM IP addressing design to a network
- Determine the appropriate classless addressing scheme using VLSM and summarization to satisfyig addressing requirements in a LAN/WAN environment
- Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols,dual stack, Tunneling, etc).
- Describe IPv6 addresses
- Identify and correct common problems associated with IP addressing and host configurations
Configure, verify, and troubleshoot basic router operation and routing on Routers
- Describe basic routing concepts (including: packet forwarding, router lookup process)
- Describe the operation of Cisco routers (including: router boot up process, POST, router components)
- Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and
- Configure, verify, and troubleshoot RIPv2
- Access and utilize the router to set basic parameters.(including: CLI/SDM)
- Connect, configure, and verify operation status of a device interface
- Verify device configuration and network connectivity using ping, trace route, telnet, SSH or other utilities
- Perform and verify routing configuration tasks for a static or default route given specific routing Requirements
- Manage IOS configuration files. (including: save, edit, upgrade, restore)
- Manage Cisco IOS.
- Compare and contrast methods of routing and routing protocols\
- Configure, verify, and troubleshoot OSPF
- Configure, verify, and troubleshoot EIGRP
- Verify network connectivity (including: using ping, trace route, and telnet or SSH)
- Troubleshoot routing issues
- Verify router hardware and software operation using SHOW & DEBUG commands.
- Implement basic router security
B.E, B.Tech, BIT, MIT, BCA, MCA, BSC, MSC, PGDCA, MS, M.Tech.